We use imported material to produce various different kinds of PTFE adhesive products in different specifications.
本公司采用进口原料，生产多种不同规格得特氟龙胶带。

Advance in Modified PTFE Research
改性聚四氟乙烯研究进展

Study on Preparation of the Composited Film of Hard Anodizing with Aluminum Alloys and PTFE
铝合金硬质阳极氧化与聚四氟乙烯复合膜层制备研究

PTFE gasket tape can be used in virtuallg all types of sealing applications throughout industry.
适用于反应釜，汽轮发电机及各种异型口罐，桶的密封。

Clinical assessment of arteriovenous fistula construction with PTFE graft and with saphenous vein
人工血管动静脉内瘘术和大隐静脉内瘘术的临床评价

Sometimes PTFE is bonded to the top cover layer of an elastomeric bearing.
有时, 聚四氟乙烯与合成橡胶支座的顶面盖层粘结。

Supplied with sampling pump and 2 meters of PTFE tubing.
全套装备包括取样泵和2米的管。

PTFE coated pump head sup port ensures chemical compatibility with any dosed liquid.
镀特氟隆泵头材质，确保与计量液体的化学相容性。

To prevent PTFE insulation casing to be punctured, it is necessary to eliminate the air gap.
防止聚四氟乙烯绝缘套管击穿的方法是必须消除空气隙。

The PTFE inserted in the grooves does not completely fill the cavity.
嵌入在槽内的聚四氟乙烯并没有完全填满空穴。

A Study on Dissipation Factor Control of Ceramic Powder Filled PTFE Laminates
陶瓷粉填充聚四氟乙烯复合介质板介质损耗控制研究

For PTFE seats multiply the numbers shown on this chart by 2.0.
对于聚四氟乙烯阀座，请用2。0乘于表中的数据。

Computer with PTFE insulation, flame resistance sheathed copper core and total shielded.
阻燃护套铜丝总屏蔽计算机电缆。

Third, the PTFE of the corrosion seal ring.
第三, 聚四氟乙烯密封环的腐蚀。

Recessing is the most effective way of preventing creep in unfilled ptfe.
凹入是阻止未加填料的聚四氟乙烯徐变的最有效的方式。

The charge store stability of PTFE and PP were studied by measuring isothermal surface potential decay after different dose of ultraviolet radiation.
用补偿法测量不同剂量的紫外照射后驻极体的表面电势。

Development of New PTFE Lip Seal
新型聚四氟乙烯油封的研制

Inuence of grid voltage on charge storage ability of porous PTFE film electrets
充电栅压对聚四氟乙烯多孔膜驻极体储电能力的影响

The tear strength and elongation of PTFE reduce when filler content increases.
随着填料添加量得增加，抗拉强度和伸长率降低。

Engineering plastic parts Design， molding and processing of Nylon， MC Nylon， OILON， POM， PTFE， and special engineering plastics PPS， PEEK materials.
工程塑料配件的设计，成型及生产加工。

Lubricated PTFE Fiber and Graphite Fiber Packing
含油聚四氟乙烯纤维及石墨纤维复合盘根

PTFE gasket is manufactured by molding method with PTFE granular resin.
聚四氟乙烯垫片是选用悬浮聚合四氟乙烯脂模塑加工制成。

PTFE modifier
聚四氟乙烯改性剂