Research on the Squeeze Cast Technology of the Castings with Large Ratio of Height to Thickness
大高径比铸件挤压铸造技术研究

Studies and Application on the CAD System of Gating and Risering Design for Ductile Iron Castings
球铁件浇冒口计算机辅助设计系统的综合研制及其实用化

Through theoretical calculation, chilling ability of graphite block to iron castings was discussed.
从理论上探讨了石墨块对铸铁件的激冷能力。

Technology of plate type steel castings produced by air impact molding line has been introduced AAR.
本文介绍了在气冲造型线上生产平板类铸钢件的铸造工艺。

Present Development Status of Carbon Steel, Low Alloying Steel Castings in Investment Casting at Home
我国碳钢、低合金钢精铸业发展现状

Based on practical production, effects of filling time on quality of die castings have been expounded.
结合生产实践，论述了充型时间对压铸件品质得影响。

Factors Affecting Chilling Tendency and Spherical Graphite Amount of Thin Section Ductile Iron Castings
影响薄壁球墨铸铁白口倾向和球墨数量的因素分析

The castings of the pump housing have the smooth inside and uniform thickness, which win American clients.
泵壳类铸件型腔光滑，壁厚均匀，深得美国客户好评！

The investigation on the percentage of contraction of highchromium white cast iron castings in EPC Process
消失模铸造高铬白口铸铁件收缩率

A new method was developed to simulate quantitatively the formation of shrinkage cavity in steel castings.
本文提出了一种新的三维定量模拟铸钢件缩孔形成的方法。

It is working capacity is comparatively large and is used for tamping large and Middle sand mould castings.
工作能力比较大，适用于大、中型铸件砂型的捣固。

Enhancement of the Adjusted Pressure Casting Technique on the Mechanical Property of Aluminum Alloy Castings
调压铸造技术对铝合金铸件性能的改善

Objective To determine an ideal finishing and polishing procedure on the surface of chromiumcobalt castings.
目的确定合理的钴铬合金铸件表面研抛程序。

In this paper, the string casting technique of small ductile iron castings with thick section were introduced.
介绍了厚实的球铁小件首尾相连组合串铸的工艺。

The inner surface of this kind of workpiece castings is often protected against corrosion with a special coat.
这上衣值多少钱？

Numerical Simulation of Thermal Stress of Diesel Engine Cylinder Block Castings Under Two Different Constraints
两种不同约束条件下发动机缸体铸件热应力场的数值模拟

All sorts of aerators can make surface treatment fordryingcylinders, cylinder covers, manhole covers and castings.
各种抛丸机为烘缸、缸盖、人孔盖、铸件进行表面处理。

Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.
铸造产品。铝合金和锌合金。压力铸件的尺寸公差

The crack in investment castings is commonly created around ingate due to easily forming superheating at root of ingate.
铸件内浇道根部易出现过热，裂纹一般产生在靠近内浇道处。

Solidification Characteristics and Microstructure of Castings with Large Ratio of Height to Diameters in Squeezing Casting
挤压铸造大高径比铸件的凝固特性和组织

The quality of castings includes quality of the casting products, quality of foundry process and quality of casting design.
铸件质量包含产品质量, 工艺过程质量和铸件设计质量。

Castings and forgings and hydrogen brittleness sensitivity to the spare parts of the appropriate USES weak acid galvanizing.
铸锻件和对氢脆敏感的零件宜用弱酸性镀锌液。

Influence of decreasing speed technology and decreasing pressure technology on quality and properties of magnesium alloy die castings
减速减压工艺对镁合金压铸件质量与性能的影响

A small apparatus used for simulating cooling environment of heavy section ductile iron castings was developed by authors themselves.
自行研制了模拟厚大铸件的冷却环境的小型凝固装置。

There are shrinkage porosity and crack in strip billet, which are the main reasons resulting in rejected castings during mill machining.
带坯的表面裂纹和内部缩松是冷加工报废的主要原因。