Industry Grinding, cutting pieces Wheel, the pagechip Belt Emery cloth Sandpaper Grinding wheel.
所属行业磨片，切割片页轮，页片砂带砂布砂纸砂轮

On acquisition of the standard value parameter of the involute straight tooth cylinder gear wheel
渐开线直齿圆柱齿轮标准值参数的获取

The aluminum alloy wheel will replace the steel wheel gradually because of it's many excellences.
铝合金车轮以其诸多优点将会逐渐代替钢制车轮。

Industry Sandpaper Grinding wheel Emery cloth Steel wheel Wheel, the pagechip Grindstone, whetstone.
所属行业砂纸砂轮砂布钢丝轮页轮，页片磨石，油石

Sprocket wheel's process method was analyzed and series sprocket wheel's milling cutter was designed.
本文分析了链轮加工的常用方法, 设计了专用链轮铣削刀具。

The wheel maximum linear velocity should be accord with the machine tooling specification requirement.
砂轮最高工作线速度要符合机床规格要求。

Analysis of the Cylindricity Tolerance and Press Mounting Curves of Axle Wheel Seat and Wheel Hub Bore
关于车轴轮座、车轮轮毂孔的圆柱度公差和压装曲线分析

Industry Grinding head Grindstone, whetstone Wheel, the pagechip Emery cloth Sandpaper Grinding wheel.
所属行业磨头磨石，油石页轮，页片砂布砂纸砂轮

The wheel on the right side of the image is the tiller wheel, used to steer the airplane on the ground.
图片右边的轮子是舵轮，用来在地面上操纵飞机转向。

Applications and management of the trackless rubber wheel accessorial transportation system in coal mine
无轨胶轮辅助运输系统在井工矿井的应用

Also, to accelerate the pitting process the face width of the pinion employed was half that of the wheel.
此外，为加快点蚀过程中的小齿轮面宽度雇用了一半，该轮。

Industry Grinding, cutting pieces Grinding wheel Sandpaper Emery cloth Steel wheel Grindstone, whetstone.
所属行业磨片，切割片砂轮砂纸砂布钢丝轮磨石，油石

Industry Abrasive Abrasives Other abrasives Wheel, the pagechip Belt Emery cloth Sandpaper Grinding wheel.
所属行业磨料磨具其他磨料页轮，页片砂带砂布砂纸砂轮

Industry Wheel, the pagechip Grinding, cutting pieces Grinding wheel Steel wheel Emery cloth Sponge wheel.
所属行业页轮，页片磨片，切割片砂轮钢丝轮砂布海绵轮

Industry Grinding wheel Emery cloth Steel wheel Grinding head Grinding, cutting pieces Wheel, the pagechip.
所属行业砂轮砂布钢丝轮磨头磨片，切割片页轮，页片

Industry Emery cloth Grinding wheel Sandpaper Wheel, the pagechip Other abrasives Cloth wheel Grinding head.
所属行业砂布砂轮砂纸页轮，页片其他磨料布轮磨头

Types and principal parameters of planetery wheel reductor for driving axle in wheel type construction machinery
轮式工程机械驱动桥行星轮边减速器型式和基本参数

The guide cooperates with the wheel halves and wheel supports so as to center a tire upon the tire holding fixture.
该指南合作，以支持中心轮胎后轮胎夹具与半轮和车轮。

The fertilizer seed discharging shaft and the land wheel axel frame are provided with a land wheel axel land wheel.
在排肥籽轴上和地轮轴架上安装地轮轴地轮。

Quantitative wheel base adjustment mechanism can achieve test bench wheel base adjustment arrival location one time.
定量轴距调整机构能实现试验台轴距调整一次自动到位。

Treatment for Abnormal Wearout of Supporting Wheel for Rotary Table Charging Car of Bucket Wheel Stacker and Reclaimer
斗轮机回转台车支撑轮磨损异常原因处理

Analysis of relation between axle load and wheel diameter and selection of freight car wheel diameter according to contact stress
根据接触应力分析轴重与轮径的关系及货车轮径的选择

a stroking mechanism is arranged on the pump shell and can control the relative sliding between the vane wheel and the grooved wheel.
泵壳上设有变量机构可控制叶轮与槽轮之间的相对滑动。

The endurance of CBN grinding wheel has been enhanced significantly and the life of it is more than 48 times of that of the brown emery wheel.
砂轮的耐用度大大提高，其使用寿命是棕刚玉砂轮的50倍以上。

We are the manufactory specialized in wheel barrow and parts of wheel barrows, hand truck , rubber wheel, platform hand truck and so on in Qin
主营手推车平板车货仓车轮胎自行车轮胎脚轮万向轮