Productive Technique of Camshaft of Pearlite Malleable Cast Iron.
珠光体可锻铸铁凸轮的生产技术
The eccentric may be part of the camshaft itself or may bolt to it.
偏心轮可能与凸轮轴是一体的, 也可能是通过螺钉连接的。
Since 1958,an engine with a single overhead camshaft has been used.
从1958年起，便已使用带有单顶置凸轮机的发动机。
Replace the friction plates in the sprocket and on the intake camshaft.
更换链轮中和进气凸轮轴上的摩擦片。
The camshaft and crankshaft gears can be connected directly, or meshed.
凸轮轴和曲轴齿轮可能被直接连结，或者相啮合。
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转，但速度仅是曲轴的一半。
This pump design operates by means of an eccentric on the engine camshaft.
这种泵是由发动机凸轮轴上的偏心轮驱动。
Calculation of Heat Balance during Mold Filling for Hollow Camshaft in EPC
消失模铸造空心凸轮轴充型过程中热平衡计算
The camshaft position sensor is located in the distributor on all engines.
在所有的引擎中，凸轮轴位置感知器位于分电盘内部。
The isothermal quenching process of the ductile iron camshaft was analyzed.
对球铁凸轮轴的等温淬火工艺进行了分析。
Argon arc remelting hardening is a new technology of manufacturing camshaft.
氩弧重熔硬化是生产凸轮轴新工艺。
Camshaft from the crankshaft through the timing belt or gear or chain drive.
凸轮轴由曲轴通过齿形带或齿轮或链条驱动。
The Design and Study of Synchronous Belt Drives For Double Overhead Camshaft
双顶置凸轮轴正时齿形带传动系统的设计研究
As camshaft rotates, the lobe, or high spot of the cam, pushes of the valve.
当凸轮轴旋转时, 凸轮凸起的或者高点的位置, 推动气门座。
The front timing cover and and a finished camshaft with timing gear on the end.
前面的时间和范围，并完成与凸轮轴齿轮的时间就结束。
These must match the corresponding markings on the sprockets or camshaft adjusters.
这些标记与链轮或凸轮轴调节器上的相应标记相对应。
A camshaft driven by a chain or belt turns in the same direction as the crankshaft.
凸轮轴被链或者带驱动，使其朝着曲轴相同的方向转动。
Check whether the actuating element of the inlet camshaft is still on the left stop.
检查进气凸轮轴执行元件是否仍在左侧止动块处。
On some engines, a metal chain is used to connect the crankshaft and camshaft gears.
在一些发动机上，金属链被用来连结曲轴和凸轮轴齿轮。
Analysis of Problems Arising from Latitudinal and Longitudinal Grinding of a Camshaft
凸轮轴横磨结合纵磨磨削工艺所产生问题的分析与研究
Application on Thermal Analysis Method in Melten Iron Control of Chilled Iron Camshaft
热分析法在冷激灰铸铁凸轮轴炉前铁液控制中的应用
Since the engine has no valves, it doesn't need any camshaft, valve lifters and so on.
因为发动机没有阀门，它不需要任何凸轮轴、起阀器等。
Formation Mechanism and Prevention of Black Line in Section of Chilled Cast Iron Camshaft
激冷铸铁凸轮轴黑线得形成机理及对策
Tighten the line on the turbocharger and on the camshaft housing to the specified torque.
在涡轮增压器上及凸轮轴室上将该管拧紧到规定力矩。
In this paper, the theory of cam profiling by CNC swing type camshaft grinder is analyzed.
详细分析了摇架式凸轮轴磨床凸轮轮廓得数控成形原理。
英文例句大全为您提供camshaft英文例句大全,camshaft英文造句,关于camshaft的英语句子,单词camshaft怎么造句,camshaft英文例句大全有哪些,哪些英语句子是关于camshaft,英语单词camshaft的句子,单词camshaft如何造句,camshaft怎么造句等。